679bfce7cf095
Forgotten Password
Sign up

Post Reply

Your name:
Subject:
Message Icon:
Verification:
This box must be left blank:

Name the AI that appears in both System Shock games:

Shortcuts: Alt+s to submit/post; Alt+p to preview


Topic Summary

Posted by: ZylonBane
« on: 20. January 2025, 23:46:04 »

Also we've got a good-enough-for-now overloaded shield generator model that eliminates the jump when it's swapped in.

@Olfred new request: noticed that the red stripes on the security crate have a serious floating issue:



Model is hackcrat.bin, "Hackable Crate" (-1886) in the hierarchy. You've worked on this model before to add the missing bottom, so hopefully you still have your files from that.
Posted by: voodoo47
« on: 16. January 2025, 10:42:57 »

@Olfred slight bump into the generator models, and maybe the laspistol. perhaps even the T2 eyeball plant. thanks as always.

//scratch the laspistol, looking at everything again, I think we'll open this can of worms later.
Posted by: voodoo47
« on: 24. December 2024, 07:26:53 »

did I miss that? yes, I did.

yeah, the first model seems to be unnecessary, actually, so not sure what was fixed there (was thinking the selection brackets, but doesn't seem like it //actually, yes). the second model actually is almost ok, just missing the small yellow light (vanilla sgen1 in the corner).
[gen.jpg expired]
Posted by: ZylonBane
« on: 24. December 2024, 06:39:23 »

command1.mis, object 285. In the SCP version of the map there's an editor-only Sympathetic Resonator floating next it that you can grab and plug into it to switch to the other model.
Posted by: Olfred
« on: 24. December 2024, 06:18:43 »

Can you give me a map name and a pointer so I can test it out? And maybe the code for the item that is needed to activate it so I can test it out.
There's a lot going on for me right now so it could be that I only can get to it in the next year.
Posted by: ZylonBane
« on: 24. December 2024, 05:50:07 »

Olfred I just took a look at these. Unfortunately they're not usable in their current state since both models turn the lights on the shield generator grey.



Also why are there two models? Only sgen2 should need updating so it doesn't jump in relation to sgen1.
Posted by: ZylonBane
« on: 16. December 2024, 06:05:53 »

Olfred, when you have a chance, could you please chop out just the legs of conduit.bin and conduitr.bin -- these parts:



-- and turn them into new objects consisting of only the four legs? This would allow visually extending the legs on conduits that have been positioned lower than their legs can reach.
Posted by: ZylonBane
« on: 08. December 2024, 00:29:36 »

This is good, thanks. Since this model is used only in dark areas, having that large solid bright area at a high self-illum level really blasts your retinas. So low self-illum works better.

Since the top is its own texture now, I blew it up to 256x128 and "textured" the surface, which looks nice too.
Posted by: Olfred
« on: 04. December 2024, 00:15:30 »

imho the 30% on the illumination is muted too much, the whole effect is kind of lost.
Posted by: Olfred
« on: 03. December 2024, 16:19:07 »

The giant pixels were to be expected.
I'll take a look at the table and work on it a bit. I might add a new texture to it which is just a solid color.
Posted by: voodoo47
« on: 03. December 2024, 14:28:51 »

if you mean the nv+no filtering issue, yeah, that's fixed;



though the top surface now seems to have something that could be described as giant pixels (12x4).
Posted by: Olfred
« on: 03. December 2024, 13:30:14 »

Like mentioned before. It's only for testing if the error still appears. Once it's confirmed to not be an issue anymore I would go ahead and work on the model for real.
Posted by: ZylonBane
« on: 03. December 2024, 05:17:00 »

On reccount.bin...
- The edge trim of the top has disappeared.
- The color of the top has changed.
- I noticed another issue with the original model; there's a gap between the top and the base.
- Could you please turn down the self-illum brightness of the yellow part? Like maybe 30 instead of 100.



For the rec wall, recwall_2 looks good. Players can't get close to the wall before it blows up, so a medium level of subdivision looks good enough.
Posted by: Olfred
« on: 02. December 2024, 23:15:00 »

Ah, so I was doing the right thing (through another means), it was just the wrong ID.
I believe I had the lucky pick and choose the wrong side of the wall for recwall_3. So for testing purposes you can flip it.
If you want to go with 3 I can make you a new model.
Posted by: ZylonBane
« on: 02. December 2024, 17:53:58 »

Thanks! I'll check these out this evening.

To jump to an object in DromEd:
- F3: enter object ID
- F8 (jump to object)
- F, 2 (level camera if object was pitched/yawed)

I... have no idea where I got "1878" from in my previous post. There is no object 1878 in rec2. The exploding wall is actually object 306.
Posted by: Olfred
« on: 02. December 2024, 16:33:08 »

Quote by Olfred:
I'll be back in about 3-4 weeks
More like months... I'm sorry guys. It's just always when I want to take some time for it. Something else gets in the way.

Quote by ZylonBane:
I've added another request to the first post. In rec2.mis, the wall that explodes (#1878, recwall.bin)
I tried to get to the location to test it right there. But I forgot how to jump to a location in the editor. So these are pretty much untested.
There are various versions I created. 0 is one I cut up manually as the model was in two parts already and I cut the surface in somewhat equal sized faces. 1 and 2 have both sides of the wall cut, for 3 I only cut one side of the wall due to the polygon limit. As noted earlier, I might have cut up the wrong side of the wall, so you might need to flip it for testing. I can modify it the other way around if needed and send you an update.

Quote by voodoo47:
@Olfred can you take a quick look at the attached object please? something wonky might be going on with the top surface (unusual pattern with texture filtering disabled, but not for everyone, it seems).
[RECCOUNT.BIN expired]
I took a look at the editor and the UV map for the tabletop is basically just all points at coordinate 0,0. Whatever a graphics card (or driver) might do with filtering, it could lead to weird behaviour.
I mapped out the UV map a bit for some quick testing. It's nothing pretty, just for testing purposes.
(There are some other uglynesses I saw when I opened the model. So it could use some touch ups anyway)
Posted by: voodoo47
« on: 15. October 2024, 14:01:01 »

@Olfred can you take a quick look at the attached object please? something wonky might be going on with the top surface (unusual pattern with texture filtering disabled, but not for everyone, it seems).
[RECCOUNT.BIN expired]
Posted by: Olfred
« on: 13. July 2024, 12:20:29 »

I'll be back in about 3-4 weeks, then I'll take a jab at it.
Posted by: voodoo47
« on: 12. May 2024, 23:17:09 »

might as well bump the laspistol too. the more I look at it, the worse it gets.
Posted by: ZylonBane
« on: 11. May 2024, 21:05:14 »

I've added another request to the first post. In rec2.mis, the wall that explodes (1878 306, recwall.bin) is very obviously an object, due to the lo-fi vertex lighting. Would definitely benefit from surface subdivision.

How it looks currently:



How lightmapped terrain would look here:

Posted by: voodoo47
« on: 24. January 2024, 15:08:15 »

well, yes?

anyway, it's still much easier to tell someone to go update the(ir already loaded) FixedObj mod than point them to a file download buried in this topic (and explain which file goes where) if a certain fixed model is needed to fix something.
Posted by: ZylonBane
« on: 23. January 2024, 01:40:08 »

The entire point of integrating Fixed Objects into SCP and SHTUP is so users don't have to keep track of yet another mod.

This is the reason why you should only install Fixed Objects if you suffer from uncontrollable twitchy OCD spasms when you don't have the latest latest latest versions of everything.
Posted by: voodoo47
« on: 21. January 2024, 16:15:17 »

Quote by JDoran:
Will these fixes be added to SCP in a new beta, or the final release of SCP version 5 (or SCP version 0.5, whichever it is)?
new release of Fixed Objects with the generator and pistol soonish, probably. and this is the reason why you should still load Fixed Objects even if you have SCP - the time periods where they are in sync (making the objects redundant) are relatively short.
Posted by: Olfred
« on: 21. January 2024, 15:53:26 »

I'll take a look if I can modify something together when I get some time again.
Posted by: JDoran
« on: 21. January 2024, 15:52:58 »

Will these fixes be added to SCP in a new beta, or the final release of SCP version 5 (or SCP version 0.5, whichever it is)?
Posted by: voodoo47
« on: 21. January 2024, 15:08:55 »

necessary no, fun, yes. besides, we like our vanilla resources.
Posted by: Olfred
« on: 21. January 2024, 14:51:13 »

Oh, I totally missed the release of beta5. You could have nagged me a bit more about it if it was that iminent.

Is it really necessary to modify the original model when there already is a pretty good replacement available?
Posted by: voodoo47
« on: 21. January 2024, 10:34:46 »

generator good to go, thanks.

pistol texture looks ok, but now that there is no rush anymore, maybe I'll just wait and see whether you can do something about the missing trigger and oddly rotated grip (see the lame mockup).
Posted by: Olfred
« on: 21. January 2024, 05:08:14 »

Sorry it took so long.

For the laser pistol. No way to fix it only in model. I gave one half of the weapon a new texture name and did a quick edit on the texture. This will likely break any mod that only updates the texture and not the model.

With the generators, I didn't check the behaviour in the actual game. So check if it looks correctly.
Posted by: voodoo47
« on: 25. December 2023, 00:17:56 »

one more to wrap the beta5 objects up - laspistol text is reversed. @Olfred would you kindly.

we'll talk about how the frick Goggles even holds that thing and where the trigger is sometime later. //lame mockup attached.


//aand I lied - sgen1.bin and sgen2.bin (normal and overloaded shield generator), the second model is slightly offset on the z-axis, needs to be moved up a bit so there wouldn't be a noticeable model pop/jump when the models are swapped.

https://www.youtube.com/watch?v=Mhv6-Tyr2ng
[mock_lame.jpg expired]
[pewpew.7z expired]
[backpew.jpg expired]
Posted by: voodoo47
« on: 29. October 2023, 09:14:10 »

maybe - we'll see. I'll bother let you know, no worry.
Posted by: Olfred
« on: 28. October 2023, 23:56:07 »

If you still want any changes or need something done just tell me so.
What about the world model, should it get the same treatment? Just with non illuminated lights?
Posted by: voodoo47
« on: 28. October 2023, 22:50:50 »

yes, that should do just fine - thanks.

we'll see what we can whip up with this as a base.
Posted by: Olfred
« on: 28. October 2023, 22:43:46 »

No they weren't square.

Made them square now (eyeballed, not perfect). Is this better now?
Posted by: voodoo47
« on: 28. October 2023, 17:29:43 »

maybe still a bit too big. are they square?
Posted by: Olfred
« on: 28. October 2023, 17:06:41 »

I see.

Is this to your liking?
[sfg_h.bin expired]
Posted by: voodoo47
« on: 28. October 2023, 16:46:25 »

well the texture would have to be edited, but once it is, we technically can, by swapping the models. that's what the current fusion cannon does.

the lights, once there, can be changed easily by hexediting the model.
Posted by: Olfred
« on: 28. October 2023, 16:43:15 »

Can you change a texture with ingame magic?
Posted by: voodoo47
« on: 28. October 2023, 16:38:53 »

sure - all I'm thinking here for now is that there is a lot of room on that weapon's body, might as well use it for something.

either way, as long as Olfred places properly sized lights there somewhere, we can then change them to whatever.
Posted by: ZylonBane
« on: 28. October 2023, 16:34:16 »

Since stasis shots are already color coded, just maybe make the light color match the shot color?
Posted by: voodoo47
« on: 28. October 2023, 10:22:29 »

woah didn't expect a model right away. alright then, lets see where this goes - I'm thinking mirroring the current fusion cannon (in normal mode), which is orange and green, not blinking. also this is supposed to be fairly subtle, so the lights would be better off (much) smaller (just like on the cannon). thanks as always.

also (as I'm actually not too amazing at this) the light placement is open to discussion, if someone thinks they should be slapped somewhere else.. and maybe they should be on a black background/slab (to again, mirror the fusion cannon //yeah, they probably should, they look a bit odd when placed on the chassis just like that. hmm, maybe editing the underlying texture could do the trick. we'll see).
[fusionlights.PNG expired]
[sfg_maybe.PNG expired]
Posted by: Olfred
« on: 27. October 2023, 23:51:36 »

not very difficult
It's or_ and green_ (strangely enough or_ is missing a counterpart)
I can change it to anything you want
[sfg_h.bin expired]
Posted by: voodoo47
« on: 27. October 2023, 18:50:31 »

@Olfred how difficult would it be to put some of those blinking lights (just colored squares really) onto the SFG hand model?
[sfg_lights.jpg expired]
Posted by: ZylonBane
« on: 28. September 2023, 01:39:52 »

I'd say the best approach to the 8-unit ladder issue would be to overwrite the vanilla model with the one that fixes the offset rails but maintains the oddball 7-point-whatever stack spacing, then include the exactly 8 units ladder model in the resource package so it can be selectively swapped out by anyone who really feels like manually fixing ladder stacks.
Posted by: Olfred
« on: 28. September 2023, 00:26:57 »

Ah, thanks for confirming that. As I'm using a Blender add-on to create the bin files I don't have the faces optimised away.
I tried to seperate a model in segments but didn't really manage to get the position ingame right so it does get two lights.
But I'm a noob when it comes to the ShockEd, I don't even know how to get a new light in there.
Posted by: Nameless Voice
« on: 28. September 2023, 00:12:03 »

Yes, the engine uses vertex lighting.  You can make the lighting look better for large areas by subdividing surfaces (though the BSP optimiser might well optimise them away if you're not careful.)
Posted by: Olfred
« on: 27. September 2023, 23:47:55 »

As promised to complete the set, here's the broken ladder. I slightly altered the geometry so it looks better.

How is the lighting of objects handled again? I remember there was some testing with the teeth. As far as I can remember the engine does vertex lighting. Is there some kind of foolproof way to test this out on a model how a light will affect it?
I tried testing around a bit but I might have used it with the wrong light as I couldn't really achieve what I wanted to test out (a model receiving different coloured lights)
Posted by: voodoo47
« on: 25. September 2023, 21:26:22 »

arrived to the same conclusion - EX and lets fix the maps accordingly. path of the least pain.
Posted by: Olfred
« on: 25. September 2023, 20:08:53 »

So I've checked a few maps and the conclusion is, there is no consistency.
In most cases the ladders are arranged according to their name suggested size, so you have a gap in the ladder.
Sometimes the ladders are shoved into each other so you don't have the exacpt spacing.
Every now and then the x/y values don't align with stacked ladders, so even if the z matches, you still see the connection point.

My conclusion would be to use the exact models for 4 and 16 as they are mostly stacked together, along with the 2 size one.
Didn't come across any 8 size ladder which was stacked. But I didn't check all the maps. The size of that ladder is off by the most. I have no idea what would be the best course of action for it. I guess it depends on how it would look like in the map.

Nevertheless, the ladders are the usual screwed up ness in model and in the map, so no matter how much I would tweak the models, there would always come the map problems. So the map needs to be touched anyway. But with the right model it could be minimized.

And again, if there are any wishes like a shifted position or a specific size, that's no big deal to change.
Posted by: voodoo47
« on: 25. September 2023, 18:06:47 »

type
hilight_obj_type ladders
into the Shocked command window and hit enter, all ladders will be hilighted blue.

Contact SMF 2.0.19 | SMF © 2016, Simple Machines | Terms and Policies
FEEP
679bfce7d0da0