67367f252ce33

67367f252de72
12 Guests are here.
 

67367f252e809voodoo47

67367f252e8a4
yep, that's the stuff. I'll post requests for the wrench and shard soon.

67367f252ea85voodoo47

67367f252eaee
ok, crystal shard (shard_w):

Heading: +45°
Pitch: +326.25° (or -33.75°)

X: -1.15
Y: +0.7
Z: +0.55


and wrench (wrench_w):

Pitch: +45°

X: +0.15
Y: +0.05
Z: +0.85
« Last Edit: 13. December 2018, 22:16:22 by voodoo47 »
67367f252ee96
H=Z
P=Y
B=X

Let me see if I got it right.

[wrench_w.bin expired]

67367f252ef86voodoo47

67367f252eff5
nope - again, the rotation is ok, but the position is a bit off, had to add extra X: +0.045, Y: +0.015, and Z: +0.255 to make it fit again. I'm guessing you will have to increase the offset of the model by those values as well.

so weird - pretty sure I've got the values right, but I'm guessing it's somehow my fault anyway. but no matter I suppose, having a working model on the second try is still pretty good.
« Last Edit: 21. December 2018, 16:08:26 by voodoo47 »
67367f252f19a
Strange, I used two different methods to change the position and it seems both don't work like wanted. How do you get the values?

67367f252f2dcvoodoo47

67367f252f333
I get the the original values by manually offsetting an additional vanilla model from the original object via a detailattach link, modifying the position until it fits, then copy pasting the final values here. doing the same thing with the first stage fixed models as well, tweaking the values until the fixed model ends up directly on top of the original offset model, then seeing the difference between the values, and again copy pasting them here.

pretty sure there is a smarter way of doing this, but as mentioned, if the result can be achieved in two attempts per model, then we are still pretty alright.
« Last Edit: 21. December 2018, 16:07:49 by voodoo47 »
67367f252f470
Mhm, I couldn't figure out how to use the detailattachment.
But when you have the other model, is the State property different than the original one?

67367f252f5a9voodoo47

67367f252f5ff
not sure to which prop you are referring to.

detailattachment is easy, you just take obj1 (must NOT have physics - fakevatar wrench in this case) and link it via detailattachment to obj2 (can have physics, avatar wrench). obj1 is now attached to obj2, and by modifying the link data, you can offset it, change the angle of the attachment etc.

a fake wrench attached to the real wrench and offset to look good (by making the lower real wrench invisible later, the result of not looking stupid is achieved. the idea of the properly offset/edited model is to do this without the extra attachment shenanigans):
[wrenchattach.jpg expired]
« Last Edit: 21. December 2018, 17:02:46 by voodoo47 »
67367f252f710
Can you give me an edited map like that?

67367f252f911voodoo47

67367f252f968
it's an edited gamesys/save combo, actually - attaching.

either replace the vanilla gamesys or load the modified one as a mod and extract the save to your SS2 folder, then run the editor, type set game_mode_backup 0 into the command window and hit enter, go Game and click persistent player position, then Game/game mode, hit escape to get to the main menu, then load the first save, hit alt+e to go editor mode, hit F3, type player and hit enter, press F8 and you are there. the fakevatar wrench obj id is 2125, the real wrench is 2124 (currently set to not visible, change Renderer/Render type prop to normal to change). the detailattachment link is editable from both.
[shock2.gam expired]
[save_0.7z expired]
67367f252fa83
I guess the problem is the involvement of the scale attribute.

67367f252fb36voodoo47

67367f252fb8a
I doubt that, the rapier wasn't scaled.
67367f252fcbe
bugger
[wrench_w.bin expired]
« Last Edit: 22. December 2018, 08:50:48 by Moderator »

67367f252fde6voodoo47

67367f252fe3d
wrench much closer now, but still needs X: +0.014, Y: +0.003, and Z: +0.095. the shard is spot on, so whatever you did with it, that's the right thing to do.
67367f2530205
the shard is spot on, so whatever you did with it, that's the right thing to do.
I did the same I did to the wrench
[wrench_w.bin expired]

67367f2530306voodoo47

67367f253035a
getting really close, X: +0.004, Y: +0.002, and Z: +0.031

no idea why the wrench is being so stubborn.
« Last Edit: 22. December 2018, 13:56:22 by Moderator »

67367f2530559voodoo47

67367f25305a7
still not 100% on point (Z:+0.01), but for all practical purposes, this works ok - thanks.

still puzzled by the wrench taking so many attempts for reasons unknown.

67367f253067cvoodoo47

67367f25306c8
forgot about the one melee weapon nobody really cares about - the psi sword (psword_w):

Bank: +45°

X: +0.02
Y: -0.96
Z: -0.4
67367f2530a00
still puzzled by the wrench taking so many attempts for reasons unknown.
beats me
[rapier_w.bin expired]
« Last Edit: 24. December 2018, 08:15:06 by Moderator »

67367f2530b03voodoo47

67367f2530b53
ok, wrench is there now (thanks), but you grabbed the rapier model again by mistake - the psi sword is psword_w.
67367f2530c66
oh, haha, my mistake. I was kind of tired and just wanted to get it to you...

[psword_w.bin expired]

Your name:
This box must be left blank:

An evil mega-corporation with 3 branches:
12 Guests are here.
7 horses seem to be on the mark
Contact SMF 2.0.19 | SMF © 2016, Simple Machines | Terms and Policies
FEEP
67367f2531bea