6740efe4245dc

6740efe427afd
5 Guests are here.
 
6740efe42c31a
candle1.bin
I took my blend file and just exported it again. So source is still the same as the old one.
I hope you keep all the sources

With blacjack. The original UV mapping was already kind of messy, so I did no special effort to make the texture align for the bottom and just placed it somewhere on the UV map.

6740efe42c4cavoodoo47

6740efe42c522
working/looking good. thanks.

well, all the files are on my harddrive, and here on the forum as well. should be pretty safe.

6740efe42c608voodoo47

6740efe42c65a
all wooden ladders appear to have their vertical bars untextured. not a big deal in the original, but becoming really ugly when hires textures are used. making the vertical bars use the same texture as the horizontal ones would be ideal (included ladder.bin which is proper as reference).

6740efe42c786ZylonBane

6740efe42c7d8
The ladder rails could also use being subdivided, since they're currently made of single loooooong polygons, which can make the lighting weird.
6740efe42c8df
Seems like it was intended to be like that.
As far as I can see into the model they just gave the verticals and the horizontal caps a simple colour.

But I can change it to be like ladder.bin

6740efe42c97fvoodoo47

6740efe42c9ce
hard to tell - they did fix them for the metal ladders in T2. anyway, yeah, making it look like ladder.bin should do just fine.
6740efe42cace
Did the subdivide and some UV work on the ladder.bin.

Tell me if you like it this way and I will do the same treatment on the other ones.

6740efe42cb98voodoo47

6740efe42cbf1
looking good as far as I can see (fixed rod tops yaay). same treatment for the rest would do nicely, I believe.
6740efe42ccf2
You should check them thoroughly, it was quite a (repetative) hassle so I might have fucked up somewhere.
But hopefully I didn't.

6740efe42cdc3voodoo47

6740efe42ce13
everything fine as far as I can see. off to the TFix resource pack they go - thanks.

this should also be added to the TafferPatcher resource pack btw, as T2 uses the old wooden ladder models with untextured vertical bars as well.

6740efe42ceaevoodoo47

6740efe42ceff
quick note - vhotted candle2 wick very short, also very 2d so only visible from certain angles.
6740efe42cfef
I only added the vhot, anything else was the model you gave me.
Is this better now?

6740efe42d260Necrobob

6740efe42d2b2
Right, repost in the proper thread this time. Thanks a lot for the link, voodoo47. :P
It goes as follows: Hey-heyyy, Bob of Necro Age-texture pack infamy here! I was told I could get some help with something in this neck of the woods. See, one of the main ways the Thief Gold resources in the Necro Age differ from the Metal Age resources is the lack of high poly human meshes. Because when I try, THIS happens: Image: http://lh3.googleusercontent.com/P8kE7PAkTgR4_tPAEzG5_wYjM7WSUYwP9Ma9goZ_cmU=w317-h633-no
Any chance any of you folks could take the time to help get some of the meshes to fit the Thief 1/Gold model rig?
6740efe42d39d
Hey, can you upload your source files so we can take a look at them?

6740efe42d517Necrobob

6740efe42d574
All of the models by tdbonko can be found here: http://darkfate.org/view/details/files/editors/dromed/models

For the record, the only models I really could find use for in Thief Gold are the Hammerite Model (armed and unarmed for Cragscleft factory), the archer model with the red uniform, the swordsman model with the purple uniform, and the mechanist model unarmed and with swords (no macemen needed). Apebeasts, watch officers and guards with long tabards unnecessary.
I *think* they're all in the AI Part1-3 archives.
6740efe42d66a
So you just take existing *.bin files and do no creation or whatever on your own?

6740efe42d7c6voodoo47

6740efe42d817
I had a quick look, and actually couldn't replicate the problem (crushed/weird joints, reported on TTLG), everything seemed ok (btw, those models would have been included in TFix for years should I have been made aware of them sooner). clean TFixed install+Dromed basic, just loaded miss2 and shape/model name changed one of the guards (textures did not load, but definitely no joint/limit planes problem).

I think you might not be using the correct cal file (it's in the darkfate archive together with its corresponding bin). anyway, if the models work properly in T2, they have to work properly in T1 as well, it should be just a matter of setting up the resources properly (if you have renamed the bins, you need to rename the cals as well).

can you post your full setup? I'd like to replace/override models in the same way you do, maybe that will get them to bug out.

6740efe42d8e1Necrobob

6740efe42d93b
Odd, I did do some extensive mucking about with different .cal files, to no avail. Will have to re check.

@Olfred
At the very most I just hex edit a .bin to point it to another texture. I can't do cg modeling at all.
6740efe42da2e
Then I'm out. Everything wonky with the engine or ShockEd is out of my competence.

6740efe42dafeNecrobob

6740efe42db52
Welp, I've found the culprit. Apparently, the .cal files must be in the base mesh folder, not that damned HIPOLY folder. Feels kinda counterintuitive if you ask me, but thems the breaks. Alls well that ends well, problem officially solved.

6740efe42dc10voodoo47

6740efe42dc6c
I think hipoly only gets activated properly if you have set character_detail 1 in cam.cfg.

anyway, would be nice to get my hands on the next version a day or two before the public release - I'd like to make sure everything plays nicely with TFix.

6740efe42dddcvoodoo47

6740efe42de2e
thanks - drop me a pm here or over at TTLG when you think the time is right.

Your name:
This box must be left blank:

How can you challenge a perfect, immortal ____? (Fill in the missing word):
5 Guests are here.
"Frimmin on the frim-fram. Frimmin on the fram." "That is exactly how I say it in my head. Get out of there, will you?"
Contact SMF 2.0.19 | SMF © 2016, Simple Machines | Terms and Policies
FEEP
6740efe437fe1