673f787e667e9

673f787e677e9
1 Guest is here.
 

673f787e6802dvoodoo47

673f787e680c3
Tags: °SS2

the logos on the earth map right after the training area really could use an overhaul.

the original textures can be found in obj.crf/txt16;

OSALOG_.PCX - OSALOG_4.PCX
MARLOG_.PCX - MARLOG_4.PCX
NAVLOG_.PCX - NAVLOG_4.PCX

the (orig) five frames are not a limit, the new set can have more. staying close to the original concept is recommended.
« Last Edit: 10. February 2018, 13:59:31 by voodoo47 »

673f787e68263ZylonBane

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e682b6
I second this request. There's really two parts to it-- recreating the logos, then getting someone to model and animate the rotating shields, reproducing the shiny effects, etc. I could probably make a decent repro of the logos. It's the 3D part that's beyond me.

As for the frame count, default frame duration in Dark is 200ms, so if there's five frames, that gives a one-second cycle for the animation. NewDark can handle a 60-frame/60 FPS animation, but IMHO that would be silly overkill-- 180 textures for a set of screens that only appears once in the entire game. 30 or even 20 FPS would probably look just fine.

673f787e6863bRocketMan

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e6868f
ZB, if you want to work together on this, I can do the modelling part.  Seemed to work pretty well when we did the spinning med logo thing...

673f787e6879fhemebond

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e687ea
Is there some sort of repository or project website that shows what textures need redoing and what's already been done? Or is this not for a specific project?

673f787e688favoodoo47

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e68943
not really - the most important stuff is posted as requests here at Engineering, just click the request tag in the first post.

the (SS2) rule of thumb is that if it hasn't been remade already, it probably could use a better version (model, texture, effect etc). pretty much all orig resources are lower res than they really should be, so you can basically choose whatever suits your skill set best, and have a shot at it. the only two recommendations are - try to avoid redundancy (for example, redoing the shotgun is almost pointless as we have quite few models available, including the excellent Tacticool model), and try to stay close to the original concepts (we like that very much around here, and statistically, the world likes it too).

673f787e68b7cZylonBane

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e68bcf
ZB, if you want to work together on this, I can do the modelling part.
If I get to this, it won't be any time soon. After giving a year of my life to SCP I'm on the edge of total SS2 burnout.
Acknowledged by 2 members: RocketMan, Colonel SFF

673f787e68c62voodoo47

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e68cab
Power Psi!
Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e68f06
To be honest. I already started working on the logos. Just didn't had the time to finish it up (yet)
Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e69038
Just a small preview of how far I currently am.
The colours need to be adjusted and I want it to be a bit more shiny. I'm new to material editing in Blender so it's a lot if testing around and might take a while till I'm finished.

The rotation and rendering is going to be easy, it will just need time.
What would be a desireable resolution for ingame use? I thought going for 512x512.
[navlog_preview.jpg expired]
Acknowledged by: unn_atropos

673f787e6929dunn_atropos

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e692ef
That looks cool.
I would suggest that you add a inner circle.
In the original picture the anchor seems to be above the horizontal line in the middle and also sticks out a bit at the top. (?)
Also I think there are some more rings in the middle, behind the curced triangles. Looks like three but I drew in just one.
Will the embossed rings be rounded in the rendering?
[navlogo_var.jpg expired]

673f787e693a3voodoo47

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e693ee
512*512 should be more than enough.

673f787e694f0ZylonBane

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e6953f
Looking good! The colors seem more saturated than I remember, but I don't have the originals right now to compare. Even 256x256 would be fine, since the player can never get close to those logos. But always nice to have higher-res raw versions available. At 256x256 we could quadruple the frame rate for the same video RAM cost as 512x512 versions.

The font does need to be updated though. 98% of the text in SS2 uses the Square721 font family. You can get the full family here.
Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e699a5
Will the embossed rings be rounded in the rendering?
Everything is embossed.
The font does need to be updated though. 98% of the text in SS2 uses the Square721 font family. You can get the full family here.
Neato. I just shrugged it off as the Blender font was "close enough". But this is even better.

Here is another version, just improved geometry and the text, nothing else.
[navlog_preview_2.jpg expired]

673f787e69a6fZylonBane

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e69abc
Just compared to the original texture. The original seems more purple than blue around the outer ring, and the anchor more blueish-white than cyan.

673f787e69b59voodoo47

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e69ba2
one more month and it will be a year since the last activity in this topic, so I'm thinking.. bump?
Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e69c8c
I'm struggling with getting the lightning anf shaders right as my experience with that is low. As for now I couldn't afford the time to learn more into that.
It's stalled but not cancelled.

673f787e69d1cmicrospam

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e69d64
I could possibly provide some assistance. I have experience with with 3ds Max's renderer.
Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e69e99
Unfortunately I am working with Blender and as far as I know render settings and such aren't compatible.

EDIT: I searched around and found an old WIP to test the ingame animation. The colours aren't corrected on this one and it's rendered with a low quality (didn't wanted to wait hours on a good quality one).
As you can see, the lighting isn't that great and overall it doesn't look as shiny as I would like it to be.
So I decided to study a bit more into lighting and shaders to get the wished results.
[navlogo unfinished.7z expired]
« Last Edit: 24. February 2016, 17:04:53 by Olfred »

673f787e6a135Grosnus

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e6a188
I don't know if anyone is still working on this but I decided to put my spin on it:







256 x 256 x 30 frames, rendered in Unity.
Acknowledged by: hemebond

673f787e6a2a2voodoo47

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e6a2f5
*shockgasm*

https://www.youtube.com/watch?v=HpEMjxs2vIQ

allright to use in the next version of SHTUP/SCP?

673f787e6a50dGrosnus

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e6a55c
allright to use in the next version of SHTUP/SCP?

no problem with that, I think it would be an overkill to make seperate mod out of it anyway

673f787e6a5ebZylonBane

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e6a636
Woah, those look really good!

673f787e6a87dvoodoo47

Re: Hires resource request - SS2 spinning Marine/Navy/OSA logos
673f787e6a8cc
no problem
thanks. and yeah, those are pretty much perfect - I'm removing the request tag from the first post and marking it as completed.
« Last Edit: 10. February 2018, 14:09:13 by voodoo47 »
673f787e6a9be
Those are really amazing. Much better as what I could have done.
And I indeed totally forgot about this, shame on me.
1 Guest is here.
Der Raumtransporter "Progress M-27M" vor dem Start in Baikonur.
Contact SMF 2.0.19 | SMF © 2016, Simple Machines | Terms and Policies
FEEP
673f787e6b568